Home  > VAPE  >  TRIUMPH 150W SQUONK MOD
TRIUMPH 150W SQUONK MOD

TRIUMPH 150W SQUONK MOD

Mod dimension
82*52*42mm
Mod material
abs Pc
Weight
91.5g
Range of resistance
0.05-3.0Ω
Battery installation
This product is designed with magnetic rear cover,which can be opened just by gently pulling.So it is easy to change the batteries.
Battery type
Dual 18650 high drain batteries-Usel can buy bythemselves ( Discharge current should be above 35A)
Output Wattage
5-150W Instantaneous violent output wattage: Setting number multiply by 140% (violent output time is 0.6S, then it will be changed to normal output)
Max output voltage
8.4V
Charging way
Use Micro-USB(5V/1A)
INTRODUCTION

PRODUCT CONTENTS

1X Triumph 150W squonk mod
1X squonk bottle
1X extra squonk bottle
1X usb charge cable
1x user manual
1X packing box
undefined            
PRODUCT APPEARANCE SKETCH MAP
undefined            
undefined            
undefined            
ATTENTIONS
INSTALLING DIAGRAMS OF BATTERY AND SQUONK BOTTLE
undefined                    
1. Pull the rear cover according to the arrow direction
undefined                    
2. Install the battery rightly according to the positive and negative pole
undefined                    
3. Fill the e-liquid you like into the squonk bottle


undefined                    
4.Put the squonk bottle into the mod Make sure that silicone tube of squonk bottle must be fitted closely with squonk guide column of mod.
undefined                    
5. Close the rear cover then you can begin to vape
HOW TO USE THE MOD
  •  

    Power on After putting the battery in device rightly.the device will be powered on with brand name " YUMMYCIG for 5 seconds then turn to main menu.


  •  

    Power off: Press fire button 5 times continuously in 2 seconds, then the device will be locked with loCKED CLICK 5X shown on the screen.


  •  

    Working: Keep pressing the fire button it begins to work; if loosen hand, then it stops working.(Notice: The mod adopt strong output setting,the first 0.6 seconds of each time using is the strong output time.this way,users can get big vapor very fast at the beginning of using the mod)


  •  

    Output Wattage adjustment: Press"+/-"to adjust the wattage, when it powered on, Press"+, wattage increases 0. 1W/time, Press"-",it dec-reases o1W/time. Press the "+/-"for long time, it will turn to adjusting mode quIcKly.


  •  

    Reset vaping puffs: Press wattage adjustment buttons at the same time, the current vaping puffs turn to ZERO


  •  

    Charging: Charge with Micro-USB until it is full, The bars of the batter-ies will move from left to right while charging and the bars will stop mo-ving while they are full charged. Please do not use the mod while it is charging. (The mod adopts balanced charging circuit, never mind how big differences are the two batteries level, users can charge the batteries with Micro-USB port directly.)

MALFUNCTION indication PROTECTION
undefined
Component overheating
1.Over puffing protection: Device will stop working with"Over 15s"on the screen, if you vape one time for more than 15 seconds.
2. Temperature precaution The temperature of inside controlling board is too high, the mod will stop working automatically, you can see Component overheating"on the screen. But can continue to use after the temperature is lower than the alerting value.
undefined
Low battery
3. Low voltage protection: When the voltage is below 6.6V, the battery icon keeps flashing, reminding you lower voltage; but can still work. When the voltage is below 6.4V, the device will stop working and screen will show " low battery"when you press the fire button.
undefined
NO ATOMIZER
4.No atomizer alarm Press fire button without connecting atomizer, the screen will show NO ATOMIZER
undefined
SHORT-CIRCUIT PROTECTION
5. Atomizer short-circuit protection When the atomizer is short circuited, press the fire button device will not work and the screen will show SHORT-CIRCUIT PROTECTION
6.Low or high resistance alert; The screen will show"Q↓"when atomizer's resistance is  lower than 0.05Q. If resistance is higher than3.0Ω, you can see“Ω↑" on the screen.
NOTE
undefined
undefined
undefined
undefined
undefined
undefined



Product Message

社媒暂无评论
Contact