SPECIFICATIONS

3 COLORS AVAILABLE

  • 01
    1X Triumph 150W squonk mod
  • 02
    1X squonk bottle
  • 03
    1X extra squonk bottle
  • 04
    1X usb charge cable
  • 05
    1x user manual
  • 06
    1X packing box
ATTENTIONS

◪Make sure to use 18650 battery with sufficient battery power.

◪After opening the rear cover, put the battery in correctly according to the marked positive and negative pole, and then close the cover

◪YUMMYCIG(brand name)will show after inserting batteries, the main menu will show after 5 seconds.

◪If no display on the screen please check whether the battery is placed properly, if the problem still exist, please contact our customer service.

PRODUCT APPEARANCE SKETCH MAP

HOW TO USE THE MOD

1.Power on: After putting the battery in device rightly.the device will be powered on with brand name " YUMMYCIG" for 5 seconds then turn to main menu.

 

2.Power off: Press fire button 5 times continuously in 2 seconds, then the device will be locked with "LOCKED CLICK 5X" shown on the screen.

 

3.Working: Keep pressing the fire button,it begins to work; if loosen hand, then it stops working.(Notice: The mod adopt strong output setting,the first 0.6 seconds of each time using is the strong output time.this way,users can get big vapor very fast at the beginning of using the mod)

 

4.Output Wattage adjustment: Press"+/-"to adjust the wattage, when it powered on, Press"+, wattage increases 0. 1W/time, Press"-",it decreases o1W/time. Press the "+/-"for long time, it will turn to adjusting mode quickly.

 

5.Reset vaping puffs: Press wattage adjustment buttons at the same time, the current vaping puffs turn to ZERO

 

6.Charging: Charge with Micro-USB until it is full, The bars of the batteries will move from left to right while charging and the bars will stop moving while they are full charged. Please do not use the mod while it is charging. (The mod adopts balanced charging circuit, never mind how big differences are the two batteries level, users can charge the batteries with Micro-USB port directly.)

INSTALLING DIAGRAMS OF BATTERY AND SQUONK BOTTLE

INSTALLING DIAGRAMS OF BATTERY AND SQUONK BOTTLE

1. Pull the rear cover according to the arrow direction

INSTALLING DIAGRAMS OF BATTERY AND SQUONK BOTTLE

2. Install the battery rightly according to the positive and negative pole

INSTALLING DIAGRAMS OF BATTERY AND SQUONK BOTTLE

3. Fill the e-liquid you like into the squonk bottle

INSTALLING DIAGRAMS OF BATTERY AND SQUONK BOTTLE

4.Put the squonk bottle into the mod Make sure that silicone tube of squonk bottle must be fitted closely with squonk guide column of mod.

INSTALLING DIAGRAMS OF BATTERY AND SQUONK BOTTLE

5. Close the rear cover then you can begin to vape

MALFUNCTION INDICATION& PROTECTION

Component overheating

1.Over puffing protection: Device will stop working with"Over 15s"on the screen, if you vape one time for more than 15 seconds.
2. Temperature precaution: The temperature of inside controlling board is too high, the mod will stop working automatically, you can see "Component overheating"on the screen. But can continue to use after the temperature is lower than the alerting value.

Low battery

3. Low voltage protection: When the voltage is below 6.6V, the battery icon keeps flashing, reminding you lower voltage; but can still work. When the voltage is below 6.4V, the device will stop working and screen will show " low battery"when you press the fire button.

NO ATOMIZER

4.No atomizer alarm: Press fire button without connecting atomizer, the screen will show "NO ATOMIZER".

Contact